|
| |
Design and development of RF & microwave
circuits, including areas such as PLL, synthesizer, oscillator, up/down
convertor, mixer (X-band to IF), low noise amplifier (LNA), power amplifier
(PA), auto-gain control (AGC) amplifier, distributed lump-element filters, I/Q
modulator demodulator, A/D and D/A convertor for interface to baseband.
Required
Detailed Technical Skills:
- Experience in board-level design of RF &
microwave circuits, including areas such as PLL synthesizer/oscillator design,
up/down convertor/mixer design (X-band to IF), low noise amplifier (LNA)/power
amplifier (PA)/auto-gain control (AGC) amplifier, distributed/lump-element
filters, I/Q modulator/demodulator, A/D and D/A convertor for interface to
baseband. Working knowledge of digital and voltage-regulation circuit is a
plus.
- We are looking for an engineer who is
challenged by design of RF microwave circuits using active components and low
cost printed circuit board techniques. The selected candidate will be
responsible for a programmable transceiver that interfaces with a modem and a
phased array antenna.
- Must have extensive hands-on experience
with the use of electronic design automation and electromagnetic simulation
tools such as Altium, ADS/Momentum or HFSS. Direct experience with MATLAB.
- Must have extensive hands-on experience
with RF/microwave measurement and test equipments, such as vector network
analyzer, spectrum analyzer, power meter/sensor, signal/waveform generator,
oscilloscope, logic analyzer. Strong laboratory/field testing, debugging and
analytical skills are essential.
- Candidate must be experienced in RF
Microwave board fabrication techniques to review and critique layouts and
stack-ups. Work with the fabrication vendors to get quality boards built, and
assembled.
- Familiarity with the design of beam
steering circuitry for applications in smart/phased array antennas.
- Familiarity with RF switching techniques.
- Engineer must know how to perform system
analysis, link budgets, noise budgets, spectrum issues and related signal
processing parameters.
Required
People Interface Skills:
-
Ability and desire
to work on multiple challenging projects.
-
Require people
oriented skills in team participation. Must be able to support and manage
their technical capabilities in a peer review environment.
-
Ability to
communicate and present/brief technical solutions to peers and customers is
required.
This position
will be located at our headquarters in Torrance, California. The position will
be a growth oriented position with excellent future senior technical or
management position opportunities. The selected candidate will be assigned to
work on one of our new projects for the US Army.
As a minimum we
require a Master’s Degree in Electrical Engineering. A PhD degree is major plus.
We are looking for someone with at least 5 years of industry RF design
experience. Entry level PhD candidates will be considered if they have directly
relevant research and internship experience.
US Permanent Residency is mandatory requirement for this position. US
Citizenship is a big plus. We will verify this requirement prior to
consideration for this position.
Please email
resume to:
|
